SECTION 1: IDENTIFICATION
Glass enamel suspension solutions
Unique Glass Colors
Safety Data Sheet (SDS)
Product Name
SERIES: Medium and Layering Mix
Product Code / SKU
201-202
Revision Date
May 10, 2026
SDS Version
1.0
Responsible Party
Unique Glass Colors
Address
1850 W Mulberry Dr, Phoenix, AZ 85015
Phone
602-341-6580
Email
info@milkweedartsaz.com
Website
https://uniqueglasscolors.com
Emergency Contact
602-341-6580
SECTION 2: HAZARD(S) IDENTIFICATION
Inhalation of vapor or mist can cause headache, nausea, irritation of nose, throat, lungs. May cause eye irritation.
Important Safety Note: When handling powdered enamels, use appropriate respiratory protection and avoid creating airborne dust.
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
| Hazardous Ingredient | % | CAS Number | LD50 | LC50 |
|---|---|---|---|---|
| Hexahydro1,3,5-tris 2 hydroxyethal-5-triazine | <0.06 | 4719-04-4 | ||
| Aqua Ammonia | <0.2 | 1336-21-6 |
* The exact ingredient percentages of composition may be withheld as trade secrets where permitted by law.
SECTION 4: FIRST-AID MEASURES
If inhaled, move affected individual to fresh air. In case of eye contact, rinse thoroughly with water for at least 15 minutes. Hold eyelids apart to insure rinsing of the entire eye surface and lids with water. In ingested, give at least 3-4 glasses of water, but do not induce vomiting. For skin contact irritation, wash affected area with plenty of water and soap, for several minutes. Seek medical attention if irritation persists.
SECTION 5: FIRE-FIGHTING MEASURES
Non-Flammable. Thermal decomposition may yield acrylic monomers. Firefighters should wear self-contained breathing apparatus and full protective clothing when fighting chemical fires.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Uncontaminated material may be recovered and used, otherwise clean up with paper towels and dispose of in trash receptacle. Material can create slippery conditions.
SECTION 7: HANDLING AND STORAGE
Close lid tightly to prevent drying out. Store in dry area. Storage temp 1-49C or 34-120F. Avoid contact with eyes and clothing. Use adequate ventilation. If spraying, use NIOSH approved respirator for dust and mist is required. Practice good housekeeping. Keep from freezing.
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Use adequate ventilation. Wear safety glasses and gloves as needed. Use a NIOSH certified (or equivalent) particle respirator when handling powders or when dust may become airborne.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear, yellowish, murkey to white viscous liquid. Odor: None or mild. Odor Threshold: Slight amine odor. Vapor Density: 1. Vapur Pressure 17.0@20C. Evaporations Rate <1.00 H2O. Boiling Point 212F, 100C. Freezing Point 32F, 0C. Solubility: Dilutable.
SECTION 10: STABILITY AND REACTIVITY
Stable under recommended storage and handling conditions. Chemically stable. No reactivity.
SECTION 11: TOXICOLOGICAL INFORMATION
Acute exposure may cause eye irritation, skin irritation, and respiratory tract irritation. No known skin or respiratory sensitization effects.
SECTION 12: ECOLOGICAL INFORMATION
No specific ecological data available. Avoid release into waterways or the environment.
SECTION 13: DISPOSAL CONSIDERATIONS
Dispose of contents and container in accordance with local, state, and federal regulations.
SECTION 14: TRANSPORT INFORMATION
Protect against physical damage. TDG: Not regulated. DOT: Not regulated. IMO: Not dangerous for transport.
SECTION 15: REGULATORY INFORMATION
WHMIS Classification: HMIS, Health 1, Fire 0, Reactivity 0. OSHA: Non-hazardous. SERA: Non-hazardous. TSCA: All components are in compliance with the inventory listing requirements of the TSCA.